It is used to study the working,synchronization and fault conditions of a three-phase alternator.A VFD controls the alternator speed and a variable DC source provides field excitation.The alternator stator terminals (R-Y-B) allow measurement and fault insertion.Measuring instruments display voltage,current ,speed and power angle.A current-limiting resistor protects the system during fault tests.The right-side panel contains a synchroscope,phase-sequence indicator,and MCBs for safe synchronization and protection.Overall,it is used in electrical labs to understand alternator operation,synchronization and fault analysis.

● Complete Feeder Protection
● Optional Directional Control
● Incipient Fault Detection
● Open-Conductor Detection
● Easy Communications
● Built-In IEEE C37.118 Synchrophasors
● Enhanced Security on Heavily Loaded Feeders

Accurate Metering
The SEL-735 exceeds the requirements of ANSI and IEC accuracy standards over a wide current
range. Capable of reliable and precise metering even in the presence of harmonics, the SEL-735
exceeds the 0.1 accuracy class requirements of ANSI C12.20 and 0.1 S accuracy class for IEC
62053-22. Quality-focused manufacturing ensures that the meter will meet these accuracy
requirements throughout its service life.
Load Profile Data Collection
You can collect billing data with a simple-to-use load profile recorder that captures years of data.
Advanced Integration
The SEL-735 integrates seamlessly into Itron MV-90 billing software, IEC 61850, DNP3, IEEE
C37.118, Modbus, or SEL communications architectures. Multiple communications ports and
protocols enable the SEL-735 to simultaneously communicate with up to ten devices.
Instrument Transformer Compensation
Transformer and Line-Loss Compensation,Time-of-Use (TOU) Metering,Predictive Demand.

This trainer is designed to study the transmission line parameters (A,B,C,D) measurement
procedure of a transmission line model . ● Measurement of TX line Parameters (A,B,C&D) of Short Tx Line Model
● Measurement of TX line Parameters (A,B,C&D) of Medium Tx Line Model (T & PI
Network)
● Measurement of TX line Parameters (A,B,C&D) of Long Tx Line Model
● Study of Ferranti Efect of TX line Model

The TerraSAS™ series photovoltaic (PV) simulators are specifically designed to emulate the
dynamic electrical behavior of a terrestrial PV solar array. They offer low output capacitance and
high closed loop bandwidth to keep up with the advanced Maximum Power Point Tracking
(MPPT) algorithms used in today’s grid-tied inverters
They offer low output capacitance and high closed loop bandwidth to keep up with the advanced
Maximum Power Point Tracking (MPPT) algorithms used in today’s grid-tied inverters. The
Embedded TerraSAS (ETS) is a high performance solution in a small form factor that combines
an agile power supply with an innovative I-V curve generator in a single standalone unit.

The NI USRP-2901 is a USB-powered software-defined radio (SDR) transceiver that operates across a wide frequency range from 70 MHz to 6 GHz. It features two full-duplex channels capable of MIMO operation with an instantaneous real-time bandwidth of 56 MHz. The hardware utilizes 12-bit ADCs and DACs to deliver a maximum I/Q streaming rate of 15 MS/s, or up to 61.44 MS/s in burst mode for a single channel. Connectivity is provided via high-speed USB 3.0 or USB 2.0 interfaces, which can bus-power the device, though an external 6V power supply is recommended for stable USB 2.0 operation. Designed for rapid prototyping in LabVIEW, the kit supports applications ranging from broadcast FM and GPS to white space and sensor network research

The Keithley 2450 SourceMeter is a versatile, fourth-generation source measure unit (SMU) that brings Ohm's law testing to the fingertips with its innovative 5-inch capacitive touchscreen. This single-channel, all-in-one instrument combines a precision power supply, current source, digital multimeter (DMM), electronic load, and trigger controller. It is particularly well-suited for characterizing modern scaled semiconductors, nano-scale materials, organic electronics, and lighting technologies like LEDs and solar cells. The 2450 provides highly flexible, four-quadrant operation, meaning it can both source and sink (act as a load) voltage or current, with a maximum output of 200 V, 1 A, and 20 W. The device is known for its high precision and accuracy, offering 6½-digit resolution and a basic measure accuracy of 0.012%

The Analog Systems Lab Kit Pro (ASLK Pro), produced by Mikroe for Texas Instruments, is a cost-effective platform designed for undergraduate engineering students to perform a wide range of hands-on analog lab experiments. The board allows users to build and test nearly any analog system using general-purpose integrated circuits (ICs) and is compatible with simulation software like TINA or PSpice.

The NI myDAQ University Kit is a portable, USB-powered data acquisition device featuring two differential analog inputs and two analog outputs with 16-bit resolution and a 200 kS/s sampling rate. It includes eight individually programmable digital I/O lines that are 3.3V LVTTL compatible and 5V tolerant for flexible digital circuit interfacing. The hardware integrates a 3.5-digit digital multimeter capable of measuring AC/DC voltage and current up to 60V, alongside resistance, diode voltage, and continuity. Power is supplied via three internal rails providing +5V, +15V, and -15V, supporting a total combined power budget of up to 500 mW for external circuits. Designed for educational use, the kit transforms a PC into an engineering lab suite with software-based instruments like a Bode analyzer, oscilloscope, and function generator

The Scientific PSD3304 is a triple-output DC power supply manufactured by Scientific Mes-Technik Pvt. Ltd., designed for laboratory, industrial, and field testing applications. It operates in both constant voltage (CV) and constant current (CC) modes and offers multiple isolated and floated DC outputs suitable for complex analog and digital circuit testing. The unit features digital displays for monitoring voltage and current and incorporates comprehensive protection circuits, including overload, short circuit, and overheat protection